SPIKE Yes/No Sensor Pod
Providing an easy method for ghost to communicate.
Deploy this palm-sized, compact sensor to visualize real-time answers to EVP questions during paranormal investigations. This natural energy sensor pod utilizes a sensitive on-board magnetometer to detect spikes allowing spirits to answer. The lighted ring will cycle around the ring - giving an entity time to choose their answer. When EMF spikes occur, this sensor pod will light up red or green based on what side the indicator landed. It's simple to use, easy to see and lasts a long time.
- Built in sensor for energy detection
- Color light display to indicate Yes or No
- Sound alert
- Compact and lightweight design
- Rechargeable long-lasting battery
Live energy readings with lights and sound
The top side of this investigation tool features a lighted ring that cycles between the red and green side. An energy change while on one side will trigger an audio alert and light up the display on that color. The lighted display ring will illuminate on that side, red or green to indicate an 'answer'.
Get creative on your paranormal investigations!
It doesn't have to just be just 'Yes' or 'No'. Ask questions and see what response you get. Experiment with any close-ended type question.
Just call me 'Spike'.
The SPIKE line of compact ghost hunting modules
This product is just one in the SPIKE collection of ghost hunting devices. Made for ease and compactness, SPIKE pods are made to be small and effective tools you can drop around your investigation area quickly and easily. Just flick them on, drop them down and get to work.
Current Line of SPIKE Sensors (and growing)
Sensitivity control
You can adjust the sensitivity of the magnetometer to suit your needs. Whether you are in an environment with lots of ambient energy like an operational office or a building with no power, this unit can handle it. On the bottom of the device is a control knob. Just turn it up or down to set it where you're picking up small fluctuations and you'll be ready to investigate.
Compact, lightweight and functional design
At just 2 inches in diameter, you can pop this in your pocket. The enclosure, featuring a rugged ribbing for a firm grip, is built with lightweight material for ease of transport. The design is built with function in mind to ensure high visibility and sensivity.
MADE IN THE USA from domestic and imported material.This product is made right here at GhostStop.
- LED lighted ring on the top
- Built in magnetometer for natural energy 'magnetic' spikes
- Sensitivity adjustment
- Rechargeable via USB cable (USB-C)
- Charging indicator LED
- Size: 2.5"diameter x 2"h
- EMF sensor is 'natural' magnetic only (to fortify from most man-made interference like phones and walkies). Magnetic flux density sensing up to ±160 mT.
Directions & Contents
Contents
Quick Start Directions
Turn the device on using the turning knob located on the bottom of the device. Turn the knob clockwise to click it on. When powered up, the lights will run a quick test and you'll hear a short tone sequence while booting up (just a few seconds).
Set the Spike Sensor in an area you wish to capture changes. Adjust the sensivity using the same power knob on the bottom. Leftmost (down position right after it clicks on) is the lowest sensivity. Turn clockwise until it reaches the far right for the highest sensivity.
We suggest starting the sensivity low to start with. Set it down, and see how the display reacts. Adjust it up until you reach a point where the display is dark when the ambient environment is quiet. Adjust it a few times to get it where you want it then you're good to go. Keep notice of electronic devices around like fans, air conditioners and appliances that may set it off. They're not a problem, you just might have to adjust to a higher baseline.
For best results, make sure the display is infront of a running video camera that can see the display and/or place an EVP recorder next to the Spike Sensor to record any correlating evidence.
Directions for Charging
- Using the USB cable provided, plug it into any standard USB power source. For plugging into a standard wall AC outlet you will need a common AC/USB adapter (not included).
- Red light on the bottom = Charging
- Blue light on the bottom = Fully Charged
- A fully-charged battery will last just over 7 hours under normal conditions.
- NOTE: Power consuption is highly dependant on how often the sensor and lights are triggered. If it is triggering constantly, the battery life is closer to 4 hours. With that, we recommend making sure to set the sensitivity to a good point where it's only going off for actual spikes and constant ambient fluctuations will not set off the device. With this, you'll get 7+ hours of continuous use.
- Charging takes about 1 hour.
- For UNLIMITED USE, this device can be used while it's charging via wall outlet or USB battery pack. A USB battery pack is handy so you can use the device and continue charging all while being completely mobile.
